Standard Tata Pad Eyes

In this sheet standard pad eye dimensions have been given for shackles for mounting or hoisting in an industrial environment. The dimensions have been verified in accordance with Tata standard ATVH: 2007 (Rötscher).


General design data

Codes :

Top angle slings :

Shackle type :

Material pad eyes :

Load contingency :

ATVH 2007

45° and 30°

Green-pin, polar

S355J2

+10%

Shackle and pad eye dimensions

Choose shackle size and applicable pad eye dimensions based on number of slings and Working Load Limit (WLL).

WLL [mtons]     Shackle Dh H F E L Tp aweld
4-slings   2-slings                  
at 45°   at 45°                 cat. 1
from to from to [mtons] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
- 1.4 - 0.7 0.5 9 15 10 25 50 8 4
1.4 2.1 0.7 1.0 0.75 11 20 10 30 65 8 4
2.1 2.8 1.0 1.4 1 12 25 10 35 80 10 4
2.8 4.2 1.4 2.1 1.5 14 25 10 35 80 12 4
4.2 5.6 2.1 2.8 2 17 30 15 45 100 15 4
5.6 9.1 2.8 4.5 3.25 20 35 15 50 110 20 4
9.1 13.4 4.5 6.7 4.75 23 40 20 55 125 25 5
13.4 18.3 6.7 9.1 6.5 26 45 20 60 130 30 6
18.3 24.0 9.1 12.0 8.5 29 52 20 68 160 30 6
24.0 26.8 12.0 13.4 9.5 33 60 20 75 180 30 6
26.8 33.9 13.4 16.9 12 36 60 30 80 190 40 8
33.9 38.1 16.9 19.0 13.5 39 65 30 85 200 40 8
38.1 48.0 19.0 24.0 17 43 75 30 95 230 45 8

* Note: These pad eyes are generally too thin for the applicable shackles with regard to the filling grade, but this is considered to be acceptable for non-repetitive hoisting.

visual
Sustaining Results Through Engineering